Is Moes Wireless Zigbee Smart Scene Knob Compatible with Home Assistant (Zigbee2MQTT)?
Hardware Safety & Electrical Verification
Electrical parameters & logic voltage safety limits before powering ICs
## Compatibility Overview
Wireless battery-powered rotary knob for controlling Home Assistant light dimming media volume and scene automation rules.
Interactive Pinout & Wiring Diagram
Hover over any pin to view voltage limits and pull-up specifications
## Technical Specification Matrix
| Feature / Attribute | Specification / Status |
|---|---|
| Hardware Protocol | Zigbee 3.0 |
| Bridge Required | NO |
| Border Router Needed | Zigbee Coordinator |
| Hardware Capabilities & Peripherals | Knob Rotation Step Single Press Double Press Long Press Note: Exposing entities to Home Assistant requires corresponding YAML component config. |
| Pairing Complexity | Intermediate |
| Factory Reset Instruction | Long press reset button for 6 seconds until blue indicator flashes rapidly. |
## Step-by-Step Pairing Guide
Factory Reset Device
Long press reset button for 6 seconds until blue indicator flashes rapidly.
Initialize Pairing Mode on Home Assistant (Zigbee2MQTT)
Open Home Assistant (Zigbee2MQTT) administration console, navigate to Integrations / Add Device, and start pairing scanner.
Confirm Entity Binding & State Verification
Verify that primary entities (Knob Rotation Step, Single Press, Double Press, Long Press) report live state changes inside Home Assistant (Zigbee2MQTT).
Production Code Generator & Preset Toolkit
Pre-configured pinouts & drivers for Moes Wireless Zigbee Smart Scene Knob
Report a Pinout Error or Submit Tested Code Snippets
Found a pin mapping quirk or built a custom ESPHome YAML driver for Moes Wireless Zigbee Smart Scene Knob? Help us keep this matrix 100% accurate.