Is SwitchBot Hub 2 (Matter & IR Bridge) Compatible with Home Assistant (Matter / BLE)?
Hardware Safety & Electrical Verification
Electrical parameters & logic voltage safety limits before powering ICs
## Compatibility Overview
Matter-certified smart Wi-Fi hub featuring built-in temperature and humidity display plus universal infrared remote blaster.
Interactive Pinout & Wiring Diagram
Hover over any pin to view voltage limits and pull-up specifications
## Technical Specification Matrix
| Feature / Attribute | Specification / Status |
|---|---|
| Hardware Protocol | Matter over Wi-Fi / BLE |
| Bridge Required | NO |
| Border Router Needed | None |
| Exposed Entities | Thermo-Hygrometer Temp Humidity (%) IR Remote Blaster |
| Pairing Complexity | Plug-and-Play |
| Factory Reset Instruction | Press and hold both buttons on Hub 2 front display for 15 seconds until icon blinks. |
## Step-by-Step Pairing Guide
Factory Reset Device
Press and hold both buttons on Hub 2 front display for 15 seconds until icon blinks.
Initialize Pairing Mode on Home Assistant (Matter / BLE)
Open Home Assistant (Matter / BLE) administration console, navigate to Integrations / Add Device, and start pairing scanner.
Confirm Entity Binding & State Verification
Verify that primary entities (Thermo-Hygrometer Temp, Humidity (%), IR Remote Blaster) report live state changes inside Home Assistant (Matter / BLE).
Production Code Generator & Preset Toolkit
Pre-configured pinouts & drivers for SwitchBot Hub 2 (Matter & IR Bridge)
Report a Pinout Error or Submit Tested Code Snippets
Found a pin mapping quirk or built a custom ESPHome YAML driver for SwitchBot Hub 2 (Matter & IR Bridge)? Help us keep this matrix 100% accurate.