Is Tapo P110M Matter Energy Plug Compatible with Apple HomeKit?
Hardware Safety & Electrical Verification
Electrical parameters & logic voltage safety limits before powering ICs
## Compatibility Overview
The Tapo P110M provides native Apple HomeKit & Matter support allowing local control of electrical loads and live energy monitoring.
Interactive Pinout & Wiring Diagram
Hover over any pin to view voltage limits and pull-up specifications
## Technical Specification Matrix
| Feature / Attribute | Specification / Status |
|---|---|
| Hardware Protocol | Matter over Wi-Fi / Thread |
| Bridge Required | NO |
| Border Router Needed | None |
| Hardware Capabilities & Peripherals | Outlet Switch State Real-Time Power (W) Note: Exposing entities to Home Assistant requires corresponding YAML component config. |
| Pairing Complexity | Plug-and-Play |
| Factory Reset Instruction | Press and hold power button for 10 seconds until LED flashes amber and blue. |
## Step-by-Step Pairing Guide
Factory Reset Device
Press and hold power button for 10 seconds until LED flashes amber and blue.
Initialize Pairing Mode on Apple HomeKit
Open Apple HomeKit administration console, navigate to Integrations / Add Device, and start pairing scanner.
Confirm Entity Binding & State Verification
Verify that primary entities (Outlet Switch State, Real-Time Power (W)) report live state changes inside Apple HomeKit.
Production Code Generator & Preset Toolkit
Pre-configured pinouts & drivers for Tapo P110M Matter Energy Plug
Report a Pinout Error or Submit Tested Code Snippets
Found a pin mapping quirk or built a custom ESPHome YAML driver for Tapo P110M Matter Energy Plug? Help us keep this matrix 100% accurate.