Is EP25 Smart Plug Compatible with Apple HomeKit?
This installation carries line voltage capable of causing severe electric shock, injury, or fire. Disconnect power at the breaker before wiring, verify with a non-contact voltage tester, and consult a qualified electrician if you are not confident working with mains circuits. Do not rely on this page as your only reference — confirm terminal assignments against the manufacturer's own documentation.
Electrical Specifications
Always confirm pin assignments against the manufacturer datasheet before wiring.
Compatibility Overview
The Kasa EP25 provides native HomeKit support allowing local control of devices and power monitoring in the Home app.
Wiring
Terminal assignments for this device
Terminal diagram not shown.
This device carries mains voltage, and its terminal markings vary by model and revision. Publishing a generic AC terminal diagram here would risk you wiring live conductors from a drawing that does not match the part in your hand — so we do not print one. Use the manufacturer's own installation sheet for terminal identification.
Technical Specification Matrix
| Feature / Attribute | Specification / Status |
|---|---|
| Hardware Protocol | Wi-Fi (HomeKit) |
| Bridge Required | NO |
| Border Router Needed | None |
| Hardware Capabilities & Peripherals | Switch (Power) Energy Monitoring (Watts) Discovered by the integration at pairing time. Which of these appear depends on your integration and its version. |
| Pairing Complexity | Plug-and-Play |
| Factory Reset Instruction | Press and hold the power button on the side for 10 seconds until the LED flashes amber and blue. |
Step-by-Step Pairing Guide
Factory Reset Device
Press and hold the power button on the side for 10 seconds until the LED flashes amber and blue.
Initialize Pairing Mode on Apple HomeKit
Open Apple HomeKit administration console, navigate to Integrations / Add Device, and start pairing scanner.
Confirm Entity Binding & State Verification
Verify that primary entities (Switch (Power), Energy Monitoring (Watts)) report live state changes inside Apple HomeKit.
Report an Error or Share What You Found in Practice
Does the reset sequence not work, an entity not appear, or the compatibility verdict not match what you see with EP25 Smart Plug? Report a correction to our index.