Is Reolink Video Doorbell PoE Compatible with Home Assistant (ONVIF / RTSP)?
Hardware Safety & Electrical Verification
Electrical parameters & logic voltage safety limits before powering ICs
## Compatibility Overview
High-definition 2K 5MP PoE video doorbell with zero cloud reliance local RTSP streaming and ONVIF protocol support.
Interactive Pinout & Wiring Diagram
Hover over any pin to view voltage limits and pull-up specifications
## Technical Specification Matrix
| Feature / Attribute | Specification / Status |
|---|---|
| Hardware Protocol | Ethernet PoE (Local API) |
| Bridge Required | NO |
| Border Router Needed | None |
| Hardware Capabilities & Peripherals | 2K RTSP Video Stream Doorbell Chime Push Motion Detection Note: Exposing entities to Home Assistant requires corresponding YAML component config. |
| Pairing Complexity | Intermediate |
| Factory Reset Instruction | Use reset pin to hold reset button inside wiring box for 10 seconds. |
## Step-by-Step Pairing Guide
Factory Reset Device
Use reset pin to hold reset button inside wiring box for 10 seconds.
Initialize Pairing Mode on Home Assistant (ONVIF / RTSP)
Open Home Assistant (ONVIF / RTSP) administration console, navigate to Integrations / Add Device, and start pairing scanner.
Confirm Entity Binding & State Verification
Verify that primary entities (2K RTSP Video Stream, Doorbell Chime Push, Motion Detection) report live state changes inside Home Assistant (ONVIF / RTSP).
Production Code Generator & Preset Toolkit
Pre-configured pinouts & drivers for Reolink Video Doorbell PoE
Report a Pinout Error or Submit Tested Code Snippets
Found a pin mapping quirk or built a custom ESPHome YAML driver for Reolink Video Doorbell PoE? Help us keep this matrix 100% accurate.