Is ThirdReality Zigbee Motion Sensor Compatible with Home Assistant (ZHA)?
Compatibility Overview
Battery-powered Zigbee 3.0 PIR motion sensor reporting occupancy directly to Home Assistant ZHA and Zigbee2MQTT.
Technical Specification Matrix
| Feature / Attribute | Specification / Status |
|---|---|
| Hardware Protocol | Zigbee 3.0 |
| Bridge Required | NO |
| Border Router Needed | Standard Zigbee Coordinator |
| Hardware Capabilities & Peripherals | Motion Binary Sensor Battery Level (%) Occupancy Timeout Discovered by the integration at pairing time. Which of these appear depends on your integration and its version. |
| Pairing Complexity | Plug-and-Play |
| Factory Reset Instruction | Press and hold reset button for 5 seconds until red LED turns on. |
Step-by-Step Pairing Guide
Factory Reset Device
Press and hold reset button for 5 seconds until red LED turns on.
Initialize Pairing Mode on Home Assistant (ZHA)
Open Home Assistant (ZHA) administration console, navigate to Integrations / Add Device, and start pairing scanner.
Confirm Entity Binding & State Verification
Verify that primary entities (Motion Binary Sensor, Battery Level (%), Occupancy Timeout) report live state changes inside Home Assistant (ZHA).
Report an Error or Share What You Found in Practice
Does the reset sequence not work, an entity not appear, or the compatibility verdict not match what you see with ThirdReality Zigbee Motion Sensor? Report a correction to our index.