Is Zigbee Temperature & Humidity Sensor Compatible with Home Assistant (ZHA)?
Hardware Safety & Verification Specs
Electrical parameters & logic voltage safety limits before powering ICs
## Compatibility Overview
A low-cost Zigbee sensor providing environmental telemetry data to Home Assistant.
Interactive Pinout & Wiring Diagram
Hover over any pin to view voltage limits and pull-up specifications
## Technical Specification Matrix
| Feature / Attribute | Specification / Status |
|---|---|
| Hardware Protocol | Zigbee 3.0 |
| Bridge Required | NO |
| Border Router Needed | None (Zigbee Coordinator) |
| Exposed Entities | Temperature Humidity Battery Level |
| Pairing Complexity | Plug-and-Play |
| Factory Reset Instruction | Press and hold the reset button on the side with a pin for 5 seconds until the LED flashes 3 times. |
## Step-by-Step Pairing Guide
Factory Reset Device
Press and hold the reset button on the side with a pin for 5 seconds until the LED flashes 3 times.
Initialize Pairing Mode on Home Assistant (ZHA)
Open Home Assistant (ZHA) administration console, navigate to Integrations / Add Device, and start pairing scanner.
Confirm Entity Binding & State Verification
Verify that primary entities (Temperature, Humidity, Battery Level) report live state changes inside Home Assistant (ZHA).
Production Code Generator & Preset Toolkit
Pre-configured pinouts & drivers for Zigbee Temperature & Humidity Sensor
Report a Pinout Error or Submit Tested Code Snippets
Found a pin mapping quirk or built a custom ESPHome YAML driver for Zigbee Temperature & Humidity Sensor? Help us keep this matrix 100% accurate.