Displays & Screens for Home Assistant & ESPHome
14 documented pairings that cover this job, compared across protocols — setup complexity, wiring notes and what each exposes once paired.
14 devices
⚡ 1 mains voltage
11 with an ESPHome config
14 shown
| Interface | Platform | |||||
|---|---|---|---|---|---|---|
| Arduino UNO R4 WiFi LED Matrix Board Arduino | SPI / I2C / 5V Native | Arduino Ecosystem | — | Plug-and-Play | — | Manual config |
| GC9A01 1.28 Round IPS Display Waveshare | SPI / 3.3V | Home Assistant (ESPHome) | — | Intermediate | ESPHome ↗ | Manual config |
| ILI9341 2.8 320x240 Color TFT Display Adafruit | SPI / 3.3V GPIO | Home Assistant (ESPHome) | — | Intermediate | ESPHome ↗ | Manual config |
| ILI9488 3.5 320x480 Color Display FocusLCDs | SPI / 3.3V | Home Assistant (ESPHome) | — | Intermediate | ESPHome ↗ | Manual config |
| LilyGO T-Display-S3 ST7789 Color LCD LilyGO | 8-bit Parallel / 3.3V | Home Assistant (ESPHome) | — | Intermediate | ESPHome ↗ | Manual config |
| MAX7219 8x8 LED Matrix Display Maxim Integrated | SPI Bus / 3.3V to 5V | Home Assistant (ESPHome) | — | Plug-and-Play | ESPHome ↗ | Manual config |
| Nextion HMI Touch Display Module Nextion | UART Serial / 3.3V | Home Assistant (ESPHome) | — | Intermediate | ESPHome ↗ | Manual config |
| NSPanel Smart Scene Wall Switch ⚡ Sonoff | Wi-Fi (Local) | Home Assistant (ESPHome) | — | Advanced | — | Manual config |
| SH1106 1.3 Inch OLED Display (128x64) SinoWealth | I2C Bus / 3.3V | Home Assistant (ESPHome) | 0x3C shared with 1 here | Plug-and-Play | ESPHome ↗ | Manual config |
| SSD1306 0.96 OLED Display (128x64) Adafruit | I2C Bus / 3.3V | Home Assistant (ESPHome) | 0x3C shared with 1 here | Plug-and-Play | ESPHome ↗ | Manual config |
| SSD1309 2.42 OLED Display (128x64) Solomon Systech | SPI / I2C / 3.3V | Home Assistant (MicroPython) | — | Plug-and-Play | — | Manual config |
| ST7735 1.8 Color TFT Display (128x160) Adafruit | SPI / 3.3V | Home Assistant (ESPHome) | — | Plug-and-Play | ESPHome ↗ | Manual config |
| ST7789 240x240 Color IPS Display Waveshare | SPI / 3.3V GPIO | Home Assistant (ESPHome) | — | Plug-and-Play | ESPHome ↗ | Manual config |
| Waveshare 2.13 E-Paper Display Waveshare | SPI / 3.3V | Home Assistant (ESPHome) | — | Intermediate | ESPHome ↗ | Manual config |
Other categorys
Temperature Sensors 33 Presence & Motion Sensors 21 Energy & Power Monitoring 21 Humidity Sensors 19 Switches & Relays 16 Air Quality Sensors 16 Distance & Level Sensors 13 Light & UV Sensors 12 Lights, Bulbs & LED Strips 9 Water, Soil & Garden Sensors 9 Cameras & Doorbells 8 Buttons, Knobs & Encoders 8 Barometric Pressure Sensors 7 Accelerometers & IMUs 7 GPIO Expanders, ADCs & DACs 7 Audio, Speakers & Buzzers 6 Doors, Locks & Garage 4 Motors & Actuators 4 GPS & Real-Time Clocks 3 Radios, IR & Coordinators 3